GE IM-6 installation instructions Install the Icemaker Fill CUP

Installation Instructions

4INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (17) into the icemaker as shown.

17

5PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the icemaker power cord plug into the socket on the rear wall, making sure the prongs and holes are matched. Press the plug firmly into the socket. Lock the plug in place by clipping the restraints onto each side of the plug. Make sure the restraints click into place.

6MOUNT THE ICEMAKER

•Lift the icemaker so the fill tube (16) fits in the fill cup opening (E). Hang the icemaker on the two mounting screws (C).

Make sure:

•The power cord is still firmly in the socket.

•The fill tube (16) extends into the fill cup opening on the back of the icemaker. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator).

THEN SECURELY TIGHTEN THE ICEMAKER MOUNTING SCREWS.

	16
C	E

7INSTALL THE ICE BUCKET

Put the ice bucket (11) under the icemaker.

Make sure the icemaker power switch is set to OFF.

11

8

ATTACH WARRANTY LABEL

A label (9) is provided with this kit to record the date of installation for warranty purposes. Apply it to the back of the refrigerator.

9

KEEP THIS MANUAL

The warranty for the icemaker is printed in this manual. Keep this manual with your Refrigerator Owner’s Manual.

The icemaker installation inside the freezer is now complete. Continue to the Water Valve Assembly section.

51