GE IM-6 installation instructions Remove Existing ICE Tray Holder

Installation Instructions

REMOVE EXISTING ICE TRAY HOLDER

Follow the instructions below for the ice tray holder that looks like yours.

Type 1

•Unhook the ice tray holder side and bottom from the retaining hooks. Lower the holder until the side is clear of the freezer shelf and remove it from the freezer. You will not need this part .

Retaining hooks

Type 2

•As you lift the tab on the left side in the holder with the blade of a screwdriver, pull the holder forward and out . You will not need this part .

Type 4

•Remove the 2 screws and save them for installation of the icemaker.

•Lift the ice tray holder off the plastic hook. You will not need this part .

Screws

Plastic hook

Type 5

•Remove the screw with a 1/4″ nutdriver.

•Pull the ice tray shelf away from the wall. Remove the shelf. You will not need this part .

•Replace the screw.

Do not lift here

Lift this tab out

Screw

Type 3

•When following Instructions G, it is not necessary to remove the ice tray shelf or, on some models, the wire shelf next to it .

•Tilt the ice tray shelf and remove it . You will not need this part .

8