31INSTALL THE ICEMAKER FILL CUPAND INSERT
Install the icemaker fill cup (center-mounted) (23) and
icemaker insert (24) into the icemaker as shown.
23
MOUNT THE ICEMAKER
•Lift the icemaker up and hang it on the icemaker
bracket (26). Make sure the insulated fill tube (21)
goes into the fill cup (23) opening. To secure the
icemaker to the bracket (26), use two screws (22)
and install as shown.
Make sure:
• The power cord is still firmly in the socket.
•The insulated fill tube (21) extends into the fill cup
opening at the back of the icemaker. (Check the
rear of the refrigerator to make sure that the fill
tube has not
pushed out the
back of the
refrigerator).
•The icemaker
is secured to
the bracket.
8
6
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the power
cord plug into the socket, making sure that the prongs
and holes are matched. Press the plug firmly into the
socket. Lock the plug in place by clipping the restraints
onto each side of the plug. Make sure the restraints
click into place.
7
INSTALL THE ICE BUCKET
Place the ice bucket (11) under the icemaker.
Make sure the icemaker power switch is set to OFF.
9
11
ATTACHWARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
10
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner’s Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Installing the Water Valve
Assembly section.
11
24
21
23
26 22
Installation Instructions