Installation Instructions

5INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (17) into the icemaker as shown.

17

6PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the icemaker power cord plug into the socket on the rear wall, making sure the prongs and holes are matched. Press the plug firmly into the socket. Lock the plug in place by clipping the restraints onto each side of the plug. Make sure the restraints click into place.

7MOUNT THE ICEMAKER

•Lift the icemaker so the fill tube (16) fits in the fill cup opening (E). Hang the icemaker on the two mounting screws (C) on the mounting block.

Make sure:

•The power cord is still firmly in the socket.

•The fill tube (16) extends into the fill cup opening on the back of the icemaker. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator).

Make sure the icemaker power switch is set to OFF.

THEN SECURELY TIGHTEN THE ICEMAKER

MOUNTING SCREWS.

16

C

E

8INSTALL THE ICE BUCKET

Place the lower freezer basket back into the freezer drawer.

The upper freezer basket is actually 2 baskets hooked together. Remove basket on the left by unhooking it.

Place the remaining upper basket in the freezer

drawer on the right side. Place the ice bucket in the left side of the lower basket.

9ATTACH WARRANTY LABEL

A label (9) is provided with this kit to record the date of installation for warranty purposes. Apply it to the back of the refrigerator.

10KEEP THIS MANUAL

The warranty for the icemaker is printed in this manual. Keep this manual with your Refrigerator Owner’s Manual.

The icemaker installation inside the freezer is now complete. Continue to the Water Valve Assembly section.

55

Page 55 Page 57
Page 56
Image 56
GE IM-6 Install the Icemaker Fill CUP, Place the lower freezer basket back into the freezer drawer
Page 55 Page 57
Top Page Image Contents