GE IM-6 Place the icemaker on its Side as shown. Insert, Icemaker power cord plug

Installation Instructions

5INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (17) into the icemaker as shown.

17

6REMOVE PLUG COVER

Remove the electric plug cover from the side wall of the freezer compartment . Insert a standard screwdriver blade into the slot in the cover and twist the screwdriver, opening the slot . The cover will pop off. Discard this cover.

7POWER CORD ADAPTER

(on some models)

There is a power cord adapter (18) included with

the kit. Visually inspect to see if the power cord on the icemaker matches the socket on the side wall of the freezer compartment. If needed, secure the adapter to the side of the icemaker power cord. When connecting the adapter to the power cord, make sure the seal is in place between the connectors, and ensure that both connector locks are snapped in place. Secure the power cord adapter to the icemaker by putting it into the hook at the back of the icemaker and attaching it to the icemaker with a wire tie (20).

Locks

Hook

Seal

8PLUG IN THE ICEMAKER

Place the icemaker on its	A
side as shown. Insert the
icemaker power cord plug
(A) into the socket on the
side wall, making sure the
prongs and holes are
matched. Press the plug
firmly into the socket .

9MOUNT THE ICEMAKER

•Lift the icemaker so the fill tube extension (10) fits in the fill cup opening (C). Hang the icemaker on the two mounting screws (A).

Make sure:

•The power cord is still firmly in the socket.

•The fill tube extension (10) is still in the fill cup opening. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator.)

•The icemaker mounting screws are located in the uppermost position of the mounting slots.

•Make sure the icemaker power switch is set to OFF.

THEN TIGHTEN THE ICEMAKER MOUNTING SCREWS SECURELY.

10

A C

10INSTALL THE ICE BUCKET

Place the ice bucket that came with your refrigerator in the lowest position on the left side of the freezer compartment.

11ATTACH WARRANTY LABEL

A label (9) is provided with this kit to record the date of installation for warranty purposes. Apply it to the back of the refrigerator.

27

12

KEEP THIS MANUAL

The warranty for the icemaker is printed in this manual. Keep this manual with your Refrigerator Owner’s Manual.

The icemaker installation inside the freezer is now complete. Continue to the Water Valve Assembly section.