AMX MVP-5200i manual Battery Settings Page, Battery Page, Setup Pages, Master

Setup Pages

Battery Settings Page

The options on the Battery Settings page allow setting of power warning preferences and battery status information, and adjustment of the display times for battery warnings (FIG. 56).

FIG. 56 Battery page

Features on this page include:

Battery Page

Back:	Saves all changes and returns to the previous page.
Connection Status icon:	The icon in the upper-right corner of each Setup page provides a constant
	visual indication of current connection status.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
Charge Status:	The Charge Status bargraph indicates the power charge available from the
	battery installed in the panel.
Panel Shutdown:	This value determines the number of minutes that would need to pass before
	the panel automatically shuts-down. Once shutdown, the unit would have to be
	restarted. The Up/Down buttons alter the timeout value (in minutes). A value of
	0 disables this feature.
	Range = 0 - 240, default = 1200 min.
Low Battery Warning:	The Up/Down buttons adjust the time value (in minutes) available on the battery
	(for use) before the panel displays a low battery warning. Range - 10 - 45,
	default = 15 min.
Very Low Battery Warning:	The Up/Down buttons adjust the time value (in minutes) available on the battery
	before the panel displays a very low battery warning (indicating near-term panel
	shutdown).
	• Range = 3 - 15, default = 5 min. This value cannot exceed the Low Battery
	Warning value.
Battery One Charge	The Battery One Charge Status field indicates the power charge currently
Status:	available on the battery.
Battery One Quality:	The Battery One Quality field indicates the maximum charge the battery can
	take. Increased use and recharging of the battery will cause the battery’s
	maximum charge to decrease over time.
Battery Level Port:	The Battery Level Port field indicates the port being used to report charge
	status levels back to the NetLinx Master (set in TPDesign4).
Battery Level:	The Battery Level field indicates the level being used to report status levels
	back to the NetLinx Master (set in TPDesign4).

56 MVP-5200i Modero Viewpoint Widescreen Touch Panel