AMX MVP-5200i manual Setup Page Cont, Setup Pages, Ethernet ” or Attempting via USB

Setup Pages

Setup Page (Cont.)

Connection Status:	Displays whether the panel is has external communication, as well as the
	encryption status of the Master, the connection type (Ethernet or USB), and to
	which System the panel is connected.
	• Until a connection is established, the message displayed is: “Attempting via
	Ethernet” or "Attempting via USB".
	• When a connection is established, the message displayed is either: “Connected
	via Ethernet “or “Connected via USB “.
	• The word “Encrypted” appears when an encrypted connection is established with
	a NetLinx Master.
	Note: The panel must be rebooted before incorporating any panel communication
	changes and to detect Ethernet connections.
Display Timeout:	Indicates the length of time that the panel can remain idle before activating Sleep
	mode, causing the device to power down.
	• Press the Up/Down buttons to increase/decrease the Display Timeout setting in
	5-second increments. Range = 0 - 30 (seconds).
	• Set the timeout value to 0 to disable Sleep mode.
	Note: Small timeout values maximize the life of the battery charge.
Inactivity Page Flip	Indicates the length of time that the panel can remain idle before automatically
Timeout:	flipping to a pre-selected page.
	• Press the Up/Down buttons to increase/decrease the Inactivity Page Flip
	Timeout setting. Range = 0 - 240 (minutes).
	• Set the timeout value to 0 to disable Inactivity Page Flip mode.
	Note: The touch panel page used for the Inactivity page flip is named within a
	small Inactivity Page field below the buttons.
Panel Brightness:	Sets the display brightness and contrast levels of the panel.
	• Press the Brightness Up/Down buttons to adjust the brightness level.
	Range = 0 - 100.
	NOTE: Be careful not to turn down the brightness too low to be able to see the
	Setup page.

48 MVP-5200i Modero Viewpoint Widescreen Touch Panel