AMX MVP-5200i manual MVP-WCS-52 Specifications, Accessories, touch panel from the security latch

Accessories

MVP-WCS-52 Specifications

Front Panel	• Securing Magnets: Prevent MVP touch panel from falling free during ejection.
Components:	• Security Latch: Adds the primary layer of security when mounting an MVP touch
	panel. When the device is inserted, this latch grabs onto the rear of the touch
	panel and secures it to prevent it from being removed.
	• Interface Connector Pins: A set of retractable pins (male) that connect to the
	underside MVP connector strip. This connection provides both communication
	and power between the touch panel and the MVP-WCS-52.
	• Support Cradle: This retractable mechanism supports a resting MVP panel and
	allows a user to either insert or remove a connected MVP panel.
	• Security Release pushbutton: Located on the front of the unit, this pushbutton
	toggles an on-screen security keypad (if security is enabled).
	- Entering the correct release code allows the MVP-WCS-52 to release the
	touch panel from the security latch.
Operating/Storage	• Operating Temperature: 0° C (32° F) to 40° C (104° F)
Environments:	• Operating Humidity: 20% - 85% RH
	• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
	• Storage Humidity: 5% - 85% RH
Included Accessories	• MVP-WCS-52 Wall Charging Station Quick Start Guide (93-5966-12)
	• Wallmount plastic conduit box (62-5966-12)
	• MVP-WCS-52 Installation Kit - Black (KA 5966-01bl)
	• MVP-WCS-52 Installation Kit - White (KA 5966-01wh)
Other AMX Equipment:	• MVP-TCS-52: Table Charging Station (FG5966-1X)
	• Wallmount Metal Conduit Box (FG037-11)
	• MVP-5200i Modero Viewpoint Widescreen Touch Panel -Gloss Black
	(FG5966-01)
	• MVP-5200i Modero Viewpoint Widescreen Touch Panel - Gloss White
	(FG5966-02)
	• PS3.0 Power Supply (FG423-30)

The MVP-5200i touch panel remains locked in the MVP-WCS-52 until unlocked by the user. This may be done by entering an appropriate password (please refer to the Password Settings Page section on page 88 for more information), or by pressing the Security Release button on the front of the device in emergencies. The station ejects the device top first (FIG. 9). The device uses two neodymium rare-earth magnets to keep the MVP-5200i from falling out of its cradle when the touch panel is angled forward..

Wall Charging Station

MVP-5200i

Security Release button

FIG. 9 MVP-WCS-52-GW Wall Charging Station - Side view

10 MVP-5200i Modero Viewpoint Widescreen Touch Panel