AMX MVP-5200i manual Commands

	Programming
Page Commands (Cont.)
@PPA	If the page name is empty, the current page is used. Same as the ’Clear Page’ command
Close all popups	in TPDesign4.
on a specified	Syntax:
page.	"'@PPA-<page name>'"
	Variable:
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'@PPA-Page1'"
	Close all pop-ups on Page1.
@PPF	If the page name is empty, the current page is used (see example 2). If the popup page is
Deactivate a	part of a group, the whole group is deactivated. This command works in the same way as
	the ’Hide Popup’ command in TPDesign4.
specific popup
	Syntax:
page on either a
specified page or	"'@PPF-<popup page name>;<page name>'"
the current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'@PPF-Popup1;Main'"
	Example 2:
	SEND_COMMAND Panel,"'@PPF-Popup1'"
	Deactivates the popup page ’Popup1’ on the current page.
@PPG	If the page name is empty, the current page is used (see example 2). Toggling refers to the
Toggle a	activating/deactivating (On/Off) of a popup page. This command works in the same way
	as the ’Toggle Popup’ command in TPDesign4.
specific popup
	Syntax:
page on either a
specified page or	"'@PPG-<popup page name>;<page name>'"
the current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'@PPG-Popup1;Main'"
	Toggles the popup page ’Popup1’ on the ’Main’ page from one state to another (On/Off).
	Example 2:
	SEND_COMMAND Panel,"'@PPG-Popup1'"
	Toggles the popup page ’Popup1’ on the current page from one state to another (On/Off).
@PPK	Kill refers to the deactivating (Off) of a popup window from all pages. If the pop-up page is
Kill a specific	part of a group, the whole group is deactivated. This command works in the same way as
	the 'Clear Group' command in TPDesign 4.
popup page from
all pages.	Syntax:
	"'@PPK-<popup page name>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	Example:
	SEND_COMMAND Panel,"'@PPK-Popup1'"
	Kills the popup page ’Popup1’ on all pages.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 103