FUNAI MWR10D6 owner manual Settings for an external source cont’d, Setting a disc to protect

Recording

Settings for an external source (cont’d)

Recording from an external source

Before you

+VR +VR

DVD+RW DVD+R DVD-RW DVD-R

Before recording from an external source, see the instructions for the connection on page 34.

1.Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected.

Refer to the table on page 13.

2.Press [OPEN/CLOSE A] to open the disc tray. Place the disc to record properly.

3.Press [OPEN/CLOSE A] to close the disc tray. This operation may take a while to be recognized.

4.Select the input of the unit which the external equipment is connected. (E2 or E1)

•To use the input jacks on the back of this unit, select “E1 (Rear)” position by pressing [0], [0], [1] with the Number buttons on the remote control.

•To use the input jacks on the front of this unit, select “E2 (Front)” position by pressing [0], [0], [2] with the Number buttons on the remote control.

5. Select a recording mode by pressing [REC	HQ	SP		SPP
MODE].	(1Hr)	(2Hr)	(2.5Hr)
Refer to “Recording mode” on page 24.
				LP
6. Press [RECORD I] on the unit to start	SLP	EP
recording.	(6Hr)	(4Hr)		(3Hr)

7.Press “Play” on the external source to record from.

8.Press [STOP C] on the unit to stop recording. This operation may take a while to be completed.

Setting a disc to protect

1 2

4 3

5

2 3 6 8 1

start Connections Getting started Recording Playing discs

+VR

DVD+RW DVD+R DVD-RW

To prevent accidental recording, editing or erasing the titles, you can protect them from the Setting menu.

1

Press [SETUP].

+VR

DVD-R

Confirmation window will appear.

Disc Protect OFFON

Yes

No

2

3

41

Note

Changing Editing Setup menu

2

Using [K / L], select “Disc Edit”. Press [OK].

Disc menu will appear.

3

Using [K / L], select “Disc Protect OFF ON”. Press [OK].

4

Using [K / L], select “Yes”. Press [OK].

A disc will be protected.

This operation may take a while to be completed.

To cancel the disc protect:

•When you insert a disc protected with this unit,

“Disc Protect ON OFF” will appear instead of “OFF ON”.

Disc Protect ONOFF

Yes

No

To release the protect for the disc, select “Disc Protect

ON OFF” at step 3, then select “Yes”.

EN 35

the Others

Español