Changing the Setup menu

Video setting

Progressive Scan (Default : OFF)

This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.

1

Press [SETUP].

2

Using [K / L], select “Playback”. Press [OK]. Your setting will be activated.

3

Using [K / L], select “Video”. Press [OK].

4

Using [K / L], select “Progressive Scan”. Press [OK].

2

1

3

4

8

5

 

6

7

5

Using [K / L], select “ON”. Press [OK].

Confirmation window will appear.

Video - Progressive Scan

Activating progressive scan:

Check your TV has progressive scan

and connect with component video cable.

NOTE: If there is no picture or picture is distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate?

Yes

No

 

Note

• If your TV is compatible with Progressive

Scan (525p / 480p), you must use the

Component video cable (commercially

available) to connect this unit to the TV. (See

6

Using [{ / B], select “Yes”. Press [OK].

7

Using [K / L], select “Yes” within 15 seconds. Press [OK].

8

Press [SETUP] to exit.

Still Mode (Default : Auto)

Select “Auto” usually.

Press [STOP C] if you are playing a disc.

1

Proceed to steps 1 to 3 above.

2

Using [K / L], select “Still Mode”. Press [OK].

3

Using [K / L], select a setting. Press [OK].

Your setting will be activated.

Auto: Optimum resolution setting (Field or Frame) is selected.

Field: Images in the still mode will be stabilized.

Frame: Images in the still mode will be highly defined.

4

Press [SETUP] to exit.

Method 2 on page 13.) If not, use the video

cable and set the Progressive Scan to “OFF”

or press and hold [SETUP] for more than 3

seconds during DVD playback.

• When selecting “No” or not pressing any

keys on the unit or remote control within

15 seconds at step 5, Progressive Scan

remains to be “OFF” (interlace scan).

2

34

Note

Frame is 1 completed video image made up of 2 fields (There are 30 frame per second of NTSC video).

68EN

Page 70
Image 70
FUNAI MWR10D6 owner manual Video setting, Progressive Scan Default OFF