FUNAI MWR10D6 owner manual One-touch Timer Recording, Turn on the unit and load a recordable disc

Recording

One-touch Timer Recording

+VR

DVD+RW DVD+R DVD-RW

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby mode.

1

Turn on the unit and load a recordable disc.

Make sure that the TV input is set on the unit.

This operation may take a while to be recognized.

2

Using [REC MODE], select a recording mode.

Refer to “Recording mode” on page 24.

3

Using [CHANNEL - / +] or the Number buttons, select a desired channel to record.

+VR

DVD-R

4

Press [REC I] repeatedly to select desired recording time.

Recording times appear on the TV screen (30 minutes to 8 hours). Recording will start.

I 0:30

0:30

(Normal Recording) 1:00

8:00 7:30

When the unit reaches the specified time, it will be turned off automatically.

To change the recording length during the One-touch Timer Recording, press [REC I] repeatedly until the desired length appear.

To cancel the One-touch Timer Recording within the specified time, press [STOP C] .

This operation may take a while to be completed.

1 1 3

4

4	2
	3

Note

•Press [DISPLAY] to see the remaining recording time on the TV screen during a One- touch Timer Recording.

•You cannot pause a One- touch Timer Recording.

•Unlike a Timer Recording, you can perform the following operations during a One-touch Timer Recording.

-Turning the power off. -Using [REC I] and [STOP C].

•The unit will be turned off automatically under the following conditions.

1)No space remained on the disc.

2)When a power failure occurs.

28EN