FUNAI ZV457MG9 A Timer Recording, Press Timer Use K / L to select New Program, then press OK

TIMER RECORDING

You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

•Set the clock before setting a timer programming.

•Insert a recordable disc with enough recordable space.

Note

• If you have not set the clock yet:

Entry screen for the clock setting will appear instead

of the timer programming list at step 1. Continue

with the step 5 in “Manual Clock Setting” on page 32

before setting a timer programming.

• Use [s / B] to move the cursor to the left and the

right in the entry screen for the timer programming.

• If a basic recording or one-touch timer recording is in

progress on one component (e.g., VCR) and the timer

recording set for the other component (e.g., DVD) is

about to begin, the unit automatically switches to the

programmed channel for timer recording 2 minutes

before the programmed starting time, and the

recording in progress (for VCR) will be canceled

UNLESS their recording channels are the same. If their

recording channels are the same, the timer recording

Guide to Timer Programming Display

3	1		2
Timer Programming
JAN/ 2/09 12:00 AM 69.1 SP
SP (1:00)		THU JAN/01 11:00AM
Date	Start	End	CH	6
JAN/02	12:00AM	1:00AM	DTV69. 1
	New Program
			1/1
4			5

1Title of a timer program (Contains date, time, channel, recording mode of the program)

2 Current date and time

3Recording mode, and length of the recording

4 Timer program list

5 Total number of pages and current page (2 pages maximum)

6 Recording media (“” (DVD) or “” (VCR))

1Press [TIMER].

2Use [K / L] to select “New Program”, then press [OK].

Timer Programming

THU JAN/01 11:00AM

Date	Start	End	CH
	New Program

•If there are 6 or more programs, use [H / G] to change pages.

3Use [K / L] to enter the date, then press [B].

Date		Start		End
JAN/02	- - : - -			- - : - -
CH		REC To	Mode
DTV69. 1		DVD		SP
			SP	2h00m

JAN/01

	When pressing [L] at
Daily	the current date, the
	date will change as
MON-SAT

MON-FRIfollows.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions

will start without canceling the recording currently in

progress. In this case, the recording of the same

channel will be made on both DVD and VCR.

• You cannot make a program whose recording time

SAT

FRI

e.g.) January 1st

Others

exceeds 12 hours.

• Cancel the timer-standby mode by pressing

[TIMER SET] before operation for either DVD or VCR.

When finished operating, press [TIMER SET] to

resume the timer-standby mode.

• In the timer-standby mode, you can turn on the

power and use the component (VCR or DVD) which is

not currently timer-programmed.

SUN

JAN/31

Español

EN 43