FUNAI ZV457MG9 A owner manual BI-DIRECTIONAL Dubbing, Use K / L to select Recording, then press OK

BI-DIRECTIONAL DUBBING

You can copy contents in a DVD to a cassette tape, or do vice versa. This function is available only when the contents are not copy-protected. (Before you start, refer to page 39 for the list of compatible discs.)

Preparing for dubbing (cassette tape to DVD):

•Insert a cassette tape to be dubbed.

•Insert a recordable DVD.

•Make sure there is enough space on the DVD.

Preparing for dubbing (DVD to cassette tape):

•Insert a disc to be dubbed.

•Insert a cassette tape with an erase-protection tab in tact.

•Make sure there is enough recordable length on the tape.

1Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2 Use [K / L] to select “Recording”, then press [OK].

“Recording” menu will appear.

3 Use [K / L] to select “Dubbing

Mode”, then press [OK].

Selection menu will appear.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR

Note for dubbing

•Dubbing direction setting in “Dubbing Mode” menu

is always reset to “VCR DVD” whenever you turn the power to the standby mode.

•You cannot change the output mode during VCR to DVD or DVD to VCR duplication.

Note for recording to a tape:

Make sure

-the cassette tape’s erase-protection tab is intact.

-the cassette tape is long enough.

Note for recording to a disc:

Make sure

- the disc is compatible (refer to page 39).

EN 51

Functions Others

Español