FUNAI ZV457MG9 A owner manual Information on VCR Functions

VCR FUNCTIONS

Information on VCR Functions

Caution on using S-video, component, or HDMI connection for VCR:

•Only the playback audio / video are available with these connections.

•Under the condition listed below, the playback image cannot be viewed. Use the standard video connection, in such case; - during DVD recording.

•HDMI video resolution cannot be changed when the unit is in VCR mode.

Playback Recording

Press [VCR] first.

1)Insert a prerecorded tape (refer to page 26 on how to insert a cassette tape).

2)Press [PLAY B] to start playback.

3)Press [STOP C] to stop playback.

To pause playback:

Press [PAUSE F].

Playback will pause and sound will be muted.

To resume playback:

Press [PLAY B].

Note

•When a cassette tape without erase-protection tab is inserted, the unit will start playback automatically.

•Tracking will be automatically adjusted upon

playback. To adjust the tracking manually, press [CHANNEL/] on the remote control.

•S-VHS cassette tape is not available on this unit.

•Playback will stop when you change the output mode.

Press [VCR] first.

1)Insert a recordable tape with an erase-protection tab intact.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette tape, remove its erase- protection tab. To record on it later, cover

the hole with cellophane tape. erase-protection tab

2)Select the recording mode using [REC MODE].

•The desired recording mode is selected in SP (standard play) or SLP (super long play) mode by pressing [REC MODE].

Recording mode:

Tape speed	Recording / playback time
Type of tape	T60	T120	T160
SP mode	1hour	2hours	2-2/3hours
SLP mode	3hours	6hours	8hours

3)Select stereo or SAP. Refer to page 35.

4)Select the desired channel to record using [CHANNEL / ] or [the Number buttons].

5)Press [REC] to start recording.

Press [STOP C] to stop the recording.

To pause recording: Press [PAUSE F].

To resume recording: Press [PAUSE F] or [REC].

After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

•Refer to pages 43-46 for instructions on timer recording.

Note

•This function is available only when the unit is connected by the VIDEO OUT jack.

94 EN