2.15 Zoom
The zoom feature allows you to double the size of the area between your vessel and any location within the current range to take a closer look at an area of interest.
1.Select location with the cursor.
2.Press and hold down the [F1 (A/C SEA)] control about two seconds if its function is set for ZOOM (default setting), or se- lect ZOOM from the menu. Zoom appears at the top right corner when the ZOOM function is on.
Cursor
Cursor
1 Place cursor | 2 Press [F1] to zoom. |
where desired. |
|
Figure 2-12 Zoom function
Note: Zoom is cancelled when range or pre- sentation mode is changed.
Cancelling zoom
Press the [F1 (A/C SEA)] control again.
