Furuno 520, 511, 611 manual Switching waypoint, Waypoint switching options window

3. STEERING MODES

3.3.3Switching waypoint

When you arrive at a waypoint on a route while in the NAV mode, you can switch to the next waypoint automatically or manually. The AUTO setting will automatically switch to the next destination waypoint when your boat is within the arrival alarm area (set on the plotter). The MANUAL setting requires operator confirmation (pressing the course control knob) before switching to the next waypoint. When in MANUAL switching mode, the NAVpilot-511/520/611 will sound for five seconds an alarm when the vessel arrives at the destination waypoint.

AUTO: When your boat is within the arrival alarm area, the buzzer sounds for five seconds and the message “WPT WAS CHANGED” appears.

MANUAL: The message “WPT WAS CHANGED. PRESS ANY KEY.” appears when the vessel arrives at the destination waypoint.

1.In the NAV mode, press the [TURN/MENU] key twice to show the NAV mode menu.

2.Rotate the course control knob to select “WAYPOINT SWITCHING” on the second page.

3.Press the course control knob to show the waypoint switching window.

AUTO

MANUAL

Waypoint switching options window

4.Rotate the course control knob to select AUTO or MANUAL as appropriate.

5.Press the course control knob and [TURN/MENU] key in order to close the menu.

3-6