Furuno 511, 520, 611 manual Processor Unit Test, Control Unit Test, Heading Sensor Test

6.MAINTENANCE & TROUBLESHOOTING

PROCESSOR UNIT TEST

PROCESSOR UNIT		ID:2097151
ROM: OK	6454002-**.**
RAM: OK	EEPROM: OK
RUDDER ANGLE		OK	1
BYPASS/CLUTCH		OK
REMOTECONT1	ON
REMOTECONT2	NOT USED
INPUT VOLTAGE		24.8 V
HEADING SENSOR:		- -
PORT1/PORT2/RS232		- -/- -/- -

**.**: Program version no.

CONTROL UNIT TEST

	CONTROL UNIT
ROM: OK		6454003-**.**
RAM: OK	EEPROM: OK
COMMUNICATION:			OK
CONTROLLER ID:			255
CAN ID:			XXXXXXX

PUSH MENU KEY TO RETURN.

**.**: Program version no.

Navpilot-520: 6454004-**.**

Navpilot-611: 6454005-**.**

HEADING SENSOR TEST

This test should be done while turning the connected sensor (PG-500) in a circle at a rate of 60°/min. or more. If the sensor does not rotate, this test terminates after one minute with NG result.

	HEADING SENSOR
ROM: OK	6454101-**.**
RAM: OK	EEPROM: OK

SENSOR: OK

RATE SENSOR: OK

TURN MORE THAN 180 IN 60

SECONDS.

PUSH MENU KEY TO RETURN.

**.**: Program vrsion no.

6-3