Furuno 511, 520, 611 manual TURN Mode, Turn menu, TURN menu inputting TLL data

3. STEERING MODES

3.4TURN Mode

The [TURN/MENU] key provides the various turning motions depending on the mode in use. There are five different turn type; 180º or 360º turns (for AUTO mode only), ORBIT, SPIRAL and FIGURE EIGHT. All turn type are available in clockwise and counterclockwise direction. To activate the TURN mode:

1.Press the [TURN/MENU] key once to show the TURN menu. This menu will change based on the mode currently in use.

180180

360360

ORBITORBIT

SPIRAL SPIRAL

FIGURE EIGHT

RADIUS OF ORBIT: 0.05 nm

PUSH MENU KEY IN ORDER TO GO TO MENU.

AUTO mode

ORBIT ORBIT

SPIRAL SPIRAL

FIGURE EIGHT

RADIUS OF ORBIT: 0.05 nm

PUSH MENU KEY IN ORDER TO GO TO MENU.

STBY, NAV mode

Turn menu

2.Rotate the course control knob to select a mode.

The arrow next to the mode name shows the direction to turn.

3.Press the course control knob to execute.

Press the [TURN/MENU] key twice to close the TURN menu.

Note: When TLL data is input from a radar or echo sounder connected, the following TURN menu appears. For details, see page 3-15.

REEIVED EXTERNAL TLL.

CANCEL

NAV

ORBIT ORBIT

SPIRAL SPIRAL

FIGURE EIGHT

RADIUS OF ORBIT: 0.05 nm

TURN menu (inputting TLL data)

3-8