Furuno 520, 511, 611 manual Dodging in AUTO or NAV mode, 3-21, Dodge mode display

3. STEERING MODE

3.6.2Dodging in AUTO or NAV mode

1.Press the [PORT] or [STBD] key down to change the course until the boat finishes to avoid the obstruction.

The equipment goes into the DODGE mode and the audible alarm sounds when one of the above keys is operated, to alert you to dodge operation. Note also that “DODG” appears on the display.

Note: Press the [PORT] and [STBD] keys together to fix the course setting value.

Heading mode

DODGE mode M: Magnetic

T: True

Course set	DODGE	HDG		359.9 heading sensor
	359		M
					Heading from
	RUDDER	0

40 20 10

10 20 40

Rudder angle (XTE or Deviation)

Dodge mode display 2

2.Release the key pressed to return to the previous mode (AUTO or NAV).

You can operate the autopilot with the status before the DODGE mode.

Note: In the AUTO mode, the [PORT] and [STBD] keys can be used to change the course degree by 5°, 10° or 20° steps depending on the installation setting. It is useful when you need to affect a large course change rapidly. However, the DODGE mode becomes inoperative when this function is activated. For details, ask your serviceman.

3-21