
1.5Main Menu Operation
Functions of the
1.Press the [MENU] key to open the menu.
MENU
DISTANCE RUN DISPLAY
DEMO
SYSTEM MENU
SYSTEM MENU2
2.Press the Omnipad at or
to select a menu item (current selection is highlighted) and press the [ENT] key. For example, when DISTANCE RUN DISPLAY is selected the following display appears. Distance run is a form of contact closure, 200 pulses/nm. To select IEC 61162 sentence, see paragraph 1.6.1.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESETOFF SET
0.00nm
ENT SET
3.Press the Omnipad at or
to select the menu item desired and press the [ENT] key. For example select RESET.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESETOFF
SET
OFF |
ON |
4.Press the Omnipad at or
to select the menu option desired and press the [ENT] key.
5.Press the [MENU] key twice to close the menu. (Some menus require only a single pressing of the [MENU] key.)
To enter numerical data
Some menus require input of numeric data. This is done with the Omnipad.
1.Select the digit or sign (+ or or
on the Omnipad. (The cursor shows the digit or sign selected.)
2.Enter a figure at each digit by hitting the Omnipad at or
. The example below shows the DISTANCE RUN DISPLAY menu, where you may adjust the distance run indication for SET.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESETOFF
SET
Cursor 000000.00nm
ENT SET
3. Press the [ENT] key to conclude.
1.6Distance Run Operation
The operator may adjust and reset the distance run indication and select display method.
1.6.1 Selecting display method
The default setting provides for independent display and adjustment of the distance run indication on all displays (display unit, Digital Indicator, distance indicator).
To show the same distance run indication on all displays do the following:
1.Press the [MENU] key to open the menu.
7