
SYSTEM MENU
SHIP SPEED AVG | 30 SEC |
SPEED OFFSET | +0.0% |
TRACK DEPTH | 2.0 m |
XDR OFFSET | +00˚ |
SPD DATA SELECT
DOPPLER
ENT: SET
2.Select TRACK DEPTH and press the [ENT] key.
SYSTEM MENU
SHIP SPEED AVG | 30 SEC |
SPEED OFFSET | +0.0% |
TRACK DEPTH | 2.0 m |
XDR OFFSET | +00˚ |
SPD DATA SELECT
DOPPLER
ENT: SET
3.Select the digit to change or
and change the value with
or
on the Omnipad.
4.Press the [ENT] key.
5.Press the [MENU] key twice to close the menu.
1.7.5 Transducer offset
Sets the deviation angle of the transducer’s orientation with reference to the ship’s longitudinal axis. This is done at installation; no user adjustment is necessary.
1.7.6 Speed data selection
When the
1.Open the SYSTEM MENU.
2.Select SPD DATA SELECT and press the [ENT] key.
GPS
DOPPLER
AUTO
3.Select the option GPS and press the [ENT] key.
4.Press the [MENU] key twice to close the menu.
See the illustration below for speed display information. If the speed displayed is unstable perform the check described in paragraph 3.2.
|
|
| ||
|
|
| speed |
|
|
|
|
|
|
SPEED | STW |
| SPEED | GPS |
DISTANCE | 10.0 kt |
| DISTANCE | 10.0 kt |
12.50 |
| 12.50 | ||
|
|
| ||
| nm |
|
| nm |
|
|
| ||
Doppler speed |
| GPS speed |
"AUTO" position indicates a Doppler speed (SDME) but if the
Note 1: If the log speed fails, the display unit reads a GPS speed, but speed data will not be output to other equipment.
Note 2: Doppler speed is used to calculate speed when both DOPPLER and GPS are abnormal in AUTO.
10