MENU
DISTANCE RUN DISPLAY
DEMO
SYSTEM MENU
SYSTEM MENU2
2.Press the Omnipad at 
to select DISTANCE RUN DISPLAY and press the [ENT] key.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESETOFF SET
0.00nm
ENT 
SET
3.Select DATA DISPLAY and press the [ENT] key.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESETOFF
IEC61162(VLW)
SET
CONTACT CLOSURE 0 . 00 nm
ENT 
SET
4.Press 
to select IEC 61162(VLW) and press the [ENT] key.
5.Press the [MENU] key twice to close the menu.
1.6.2 Adjusting distance run
Distance run can be changed when the menu item DATA DISPLAY is selected to CONTACT CLOSURE. It may also be changed only at the display unit when IEC 61162(VLW) is selected. .
1.Press the [MENU] key to open the menu.
2.Use 
to select DISTANCE RUN DISPLAY and press the [ENT] key.
3.Select SET and press the [ENT] key.
The cursor circumscribes the leftmost digit of the distance run figure.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESETOFF
SET
Cursor 
000000.00nm
ENT 
SET
4.Press the Omnipad at 
or 
to select the digit to change.
5.Press the Omnipad at 
or 
to change value. The setting range is 0.00 nm to 999999.99 nm.
6.Press the [ENT] key followed by pressing the [MENU] key twice to conclude your selection and close the menu.
1.6.3 Resetting distance run to zero
Distance run can be reset to zero when the menu item DATA DISPLAY is selected to CONTACT CLOSURE. It may also be reset to zero only at the display unit when IEC 61162(VLW) is selected.
1.Press the [MENU] key to open the menu.
2.Press the Omnipad at 
to select DISTANCE RUN DISPLAY and press the [ENT] key.
3.Select RESET and press the [ENT] key.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESETOFF
SET
OFF |
ON |
4. Press the Omnipad at 
to select ON.
8
