Furuno DS-80 Operation of Display Unit, Controls, Turning the Power On/Off, Power on, Power off

1OPERATION OF DISPLAY UNIT

1.1Controls

			Omnipad
			Selects items, options
			on menus.
Opens/closes the menu.	MENU	ENT	Registers options on menus.
Selects display; speed	DISP	DIM	Adjusts panel illumination.
plus distance or speed.
	*		Adjusts LCD contrast.
	DS-80	PWR	Turns power on/off.

1.2Turning the Power On/Off

1.2.1 Power on

Press the [POWER] switch to turn on the equipment. The last-used display appears. The example below shows the speed and distance run.

SPEED	STW
DISTANCE	10.0 kt	Speed
	12.50
		RunDistance
	nm

Note: STW means Speed Through Water. This indication flashes when transducer temperature, which can be monitored on the TEST display (see page 16), is abnormal. This means speed accuracy is less than stated in the specifications.

1.2.2 Power off

Press the [POWER] switch to turn the power off.

Note: Keep the DS-80 energized continuously unless it fails. Turning off the DS-80 may cause an inconvenience in associated equipment, such as a radar.

5