![](/images/new-backgrounds/1272070/27207033x1.webp)
3. INITIAL SETTINGS
DGPS port
Set the following when connecting with DGPS beacon receiver
Note: Signal level for DGPS port is RS232C.
1.Press the [MENU] key.
2.Press the CONFIGURATION soft key.
3.Press the SETUP NMEA/DGPS PORT 2 soft key.
4.Select FORMAT, and then press the EDIT soft key. The following window appears.
| OUTPUT FORMATNMEA 0183 | SETUP | |
▲FORMAT | PORT2 | ||
| ▲ | VER 1.5▲▲▲ |
|
|
| NMEA0183 Ver1.5 |
|
|
| NMEA0183 Ver2.0 |
|
|
| RTCM104 (EXTRN) |
|
|
| RTCM104 (INTRN) |
|
|
| RTCM104 (OUTPUT) |
|
| ▼ |
| ENTER |
DGPS 3D |
|
| CANCEL |
|
|
|
Output format window (PORT 2)
5. Select NMEA version. The selected item is indicated by black button.
NMEA0183 Ver1.5/2.0: | Select one when connecting PC or |
RTCM104 (EXTERN): | Select this when connecting external DGPS beacon receiver. |
RTCM104 (INTRN): | Select this for built in internal DGPS beacon receiver. |
RTCM104 (OUTPUT): | Select this when outputting differential data of the internal |
| DGPS beacon receiver to other GPS navigator. |
Note 1: Note that you cannot setup sentences when you select RTCM104 at the format.
Note 2: For
6.Press the ENTER soft key.
7.Press the [PLOT] key to finish.
9