4. INCORPORATION OF DGPS BEACON RECEIVER KIT (for
Disassembly
Procedure
1.Turn off the power. Wait at least one minute before opening the cover, to allow capacitors to discharge.
2.Remove nuts attached to DGPS, NMEA and power supply connectors at the rear of the display unit.
Nut, washer | Nut |
| Cover assembly |
Screws X 6 B
Screws X 6 A
WARNING
Do not connect the power cable with the cover re- moved.
Panel/chassis assembly
Connector gasket
Removing cover assembly
3.Remove nuts and washer attached to ANT connector.
4.Remove twelve screws at rear of the display unit to detach panel/chassis assembly from cover assembly.
Discard six screws A (3X12).
15
