Furuno GP-1650WD installation manual Dgps Setting, Dgps options window

3. INITIAL SETTINGS

3.4DGPS Setting

When external DGPS beacon receiver (RS-232C only) is connected or the DGPS beacon receiver is incorporated, set the DGPS mode referring to the following procedure.

1.Press the [MENU] key.

2.Press the GPS/DGPS/TD OPTIONS soft key.

3.Press the DGPS/WAAS SETUP OPTIONS soft key.

FORMAT	NMEA	DGPS
		WAAS
DGPS/WAAS MODE	OFF
BEACON FREQUENCY	AUTO
BEACON BAUD RATE	AUTO
WAAS SEARCH	AUTO	EDIT
CORRECTION DATA SET	02
DGPS/WAAS ALARM	ON
DGPS 3D		RETURN

DGPS options window

4.Select DGPS/WAAS MODE and press the EDIT soft key.

5.Select DGPS or AUTO and press the ENTER soft key. WAAS: WAAS data can be received.

AUTO: DGPS, WAAS or GPS data can be automatically received, The order of priority is DGPS, WAAS and GPS.

Note: If the external DGPS beacon receiver GR-80 is connected to the GP-1650W, refer to the interconnection diagram below.

Connection with GR-80

GP-1650W

DGPS

GR-80

DATA

(Set RS-232C)

> 1 >
> 2 >
RD > 3 >			YEL
> 4		>
SD > 5		>	RED
SG > 6		>	BLU
	> 7	>

<1 < TD-B

<3 < RD-B

<7 < GND

MJ-A7SPF0003-050 cable

(option)

12