Menu item | Function | |
H_SIZE | Adjusts the image size horizontally. | |
Horizontal size: Narrow (◄) ↔ Wide (►) | ||
| ||
V_SIZE | Adjusts the image size vertically. | |
Vertical size: Narrow (◄) ↔ Wide (►) | ||
| ||
PHASE** | Adjusts the timing of sampling so that the flicker | |
disappears and the text is clear. | ||
| ||
CONTRAST | Increases or decreases contrast level. | |
Dark (◄) ↔ Bright (►) | ||
| ||
H_POSITION | Moves the image position horizontally. | |
To the left (◄) ↔ To the right (►) | ||
| ||
V_POSITION | Moves the image position vertically. | |
Up (◄) ↔ Down (►) | ||
| ||
R_LEVEL | Adjusts red color level. | |
Weak (◄) ↔ Strong (►) | ||
| ||
G_LEVEL | Adjusts green color level. | |
Weak (◄) ↔ Strong (►) | ||
| ||
B_LEVEL | Adjusts blue color level. | |
Weak (◄) ↔ Strong (►) | ||
| ||
TEMPERATURE | Adjusts color temperature. | |
5500K/6500K/7000K/8000K | ||
| Warm color ↔ Cold color | |
B STRETCH | Emphasizes black color. | |
Standard (OFF, ◄) ↔ Dark (►) | ||
| ||
W STRETCH | Emphasizes white color. | |
Standard (OFF, ◄) ↔ Bright (►) | ||
| ||
| Selects the signal resolution. | |
DISP MODE | FULL: Shows the input signal on entire screen. | |
EVEN: Shows the input signal with original size. | ||
| NORMAL: Shows the input signal with same | |
| aspect ratio. | |
SHARPNESS** | Sharpens the edge horizontally. | |
Softens characters and lines. (◄) | ||
| ↔ Sharpens characters and lines. (►) |
Available range
Variable depending on
signal type
5500K/6500K/7000K/8000K
OFF,
OFF,
FULL/EVEN/NORMAL*
*: When inputting VGA, SVGA or XGA, a circle may be displayed as an ellipse because the aspect ratio differs. In this case, select NORMAL from the DISP MODE menu item on the RGB1, 2 or DVI menus. The top and bottom on the screen are left blank, but this is normal.
**: If the characters are not clear, adjust PHASE and SHARPNESS.
8