Furuno MU-17OC manual Choosing Source for Main Picture, Disp selection window

4.3 Choosing Source for Main Picture

Choose the signal to display on the entire screen as follows:

1.Press the DISP key to show the DISP selection window.

This window disappears if there is no operation for five seconds.

RGB1

RGB2

DVI

VIDEO1

VIDEO2

VIDEO3

DISP selection window

2. Press the ▲ or ▼ key to select a signal.

You can also select the signal by pressing the DISP key continuously. RGB1-2: The signal from the chosen RGB port is displayed.

DVI: The signal from the DVI port is displayed.

VIDEO1-3: The external video from the chosen VIDEO port is displayed on the entire screen.

3.Press the ◄ or ► key to close the window.

The window disappears if there is no operation within five seconds.

Note: The name of the selected signal appears at the right top corner for five seconds after the DISP selection window is erased.

16