2. WIRING
Connect external equipment to the MU-170C by referring to the drawing below, the table on the next page and the interconnection diagram in this manual.
Note: The MU-170C does not have a “hot plug” function. Therefore, when the power switch of the MU-170C and the equipment connected to it are on, do not connect or disconnect the interconnection cable to prevent damage to equipment.
| | ( | )(+) |
| | | Fuse |
| | Blue | Red |
| | VIDEO3 | TB-1 |
| | | 12-24 VDC |
| | VIDEO2 | 14AWG-2C-PVC *5M* |
| CCD camera, | VIDEO1 | (Supplied) |
| |
| Video cassette | 2.5C2V or 3C2V | Ground terminal |
| recorder, etc. |
| (Local supply) | |
| | |
| | DVI-D |
| | | FAR-21X7 series |
| | DVI-D/D SINGLELINK5M |
| | (Option) |
FCV-1200L/1200LM | | | | | | | | |
CH-250 | | | | | | RGB2 | | |
CH-270 | | | | | | | | |
CSH-5L/8L | | | | | | | RGB1 | |
FSV-24/24S | | | | | | 3COX-2P-6C (Option) |
GD-280/380/680 | | | | | |
| | | | | | | | |
FR-1500 MK3 series | | | | | | | | | |
FR-21X5 series | | | | | | | | |
| | | | | | | |
NavNet vx2 | | | | | | | | |
| | | | | | | | | |
Display unit (bottom view)
5
