Furuno MU-17OC manual Remote Controller, Setting battery, Writing the device name on the label

1.2 Remote Controller

Setting battery

1. Open the back cover of the remote controller and set two batteries supplied.

WARNING

Ensure battery polarity is correct.

Wrong polarity may cause the batteries to explode.

2. Close the back cover of the remote controller.

Writing the device name on the label

Write the device name (ex. “FCV-1200L”) for each “signal” name on the label supplied with the remote controller. Attach the label to the remote controller at the location shown below.

RGB1 RGB2 DVI

VIDEO1 VIDEO2 VIDEO3

PIP1 PIP2 PIP3

BRILL + MENU

RGB 1	: FCV-1200L
RGB2	:
DVI	:	FAR-21X7 series

VIDEO1: CCD camera

VIDEO2:

VIDEO3:

Label

Remote controller RMC-200

4