G-SPEED Product Guide
Pa
g
e 6
7.2 Installing the Disk Drive Modules
1. Remove the G-SPEED Bezel by pulling forward.
2. Install the six disk drive modules into the G-SPEED
enclosure and secure them in place by pushing on the
lever.
Note: The G-SPEED writes a signature to each drive so the drive modules
can be installed in any position in the G-SPEED enclosure.
3. Replace the G-SPEED Bezel.
7.3 (Fibre Channel) Installing the SFP and Optical Cable
1. Install the SFP into PORT 0 of the G-Speed. It will seat
with an audible click (to remove, open the latch and pull)
2. Remove the protective plugs from the SFP and
optical cable.