Lamp replacement
Deactivate the wall hood's power supply as described on Page 4.
First remove the grease filter.
Detach the lamp cover by removing the screws that secure the lamp cover to the inside of the housing.
Remove the securing clip and first pull the fluorescent lamp downwards out of the plastic holder and then horizontally out of the socket.
Defective fluorescent lamps must only be replaced by lamps of the same type.
The original spare part:
•for AH
spare part number 211406
•for AH
spare part number 292103
is available from specialist dealers or your Gaggenau
Insert the new fluorescent lamp in the socket so that it audibly engages. Then press the lamp securely into the plastic holder and close the securing clip onto the holder. The lamp is now secure against dropping out.
Clean the lamp cover in mild detergent and then secure it on the hood again.
Connect the unit to the power again.
Note:
As standard, your hood contains a fluorescent tube with the colour „bright white". This ensures optimum illumination of your cooking area. If you wish a different colour, you can order the colours „warm tone" and „Interna” from your specialist dealer.
12
