Cleaning and care
Fig. 12 | Grease filter |
Fig. 13
The grease filter saturation display F flashes after operating 30 hours to indicate you that you should clean the grease filter (see Fig. 2). It goes without saying that the grease filter can be cleaned at any time, even if the grease filter saturation display is not flashing.
The metal grease filters can be removed easily for cleaning (see Fig. 12):
Grip the handle rail of the grease filter and pull the grease filter towards you out of the unit.
The metal grease filters can be cleaned in a dish- washer at a maximum temperature of 65 °C
(149 °F), where it should be supported vertically to allow food or residue to drain off.
Slight discolorations may occur when cleaning metal filters in a dishwasher.
If possible, the inner parts of the housing should be wiped out with hot water when replacing the filters.
The sound insulation mats can be cleaned easily.
Avoid using pointed or rough objects when cleaning them.
After cleaning it,
The grease filter saturation display is reset by pressing the F key. Flashing of the indicating lamp goes off.
Note:
Activated charcoal filters do not contain any polluting substances. They can be disposed of through the normal refuse collection channels.
10
