4. Cleaning and care
Fig. 13 |
Cleaning the grease filters
The grease filter saturation display F flashes after an operating time of 30 hours to you indicate to you that you should clean the grease filter (see Fig. 3). The grease filters can of course be cleaned at any time, even if the grease filter saturation display has not started to flash.
The stainless steel grease filters can be removed easily for cleaning (see Fig. 13):
Disconnect the power supply (switch off the fuse).
Grip the grease filter handle and push the slide towards the rear. Then pull the grease filter downwards out of the holder; repeat the operation for the other grease filters.
You can clean the stainless steel grease filters in a dishwasher at a maximum temperature of 130°F/ 55 °C, where it should be supported vertically to allow food or rinsing residues to drain off.
If possible, the inner parts of the housing should be wiped out in hot rinsing water when replacing the filters.
Caution:
when cleaning the inside of the housing, beware of protruding parts.
Fig. 14
After having cleaned them,
Important:
the handles of both grease filters must be visible after assembly.
Press the F key to set the elapsed hours counter to zero. Flashing of the indicating lamp goes off.
10
