
Intense level
For especially strong odor or vapor, use the intense level.
1Press the ÿ button to switch on the appliance. The fan starts in setting 2.
2Press the Ž button to switch on the Intensive setting.
Note: If the button was pressed while the fan is running on speed 1, 2 or 3, the electronics automatically switch back to the previously- selected fan speed after 5 minutes.
3To switch off the Intensive setting earlier, press the ÿ button or the button for another fan speed.
Setting the duration
You can set the duration after which the Intensive setting switches off automatically.
Duration | Press buttons simultaneously |
|
|
3 minutes | Ž and 1 |
|
|
5 minutes | Ž and 2 |
|
|
10 minutes | Ž and 3 |
|
|
The factory setting is set to 5 minutes.
Run-on function
The
1First press the button for the desired fan speed 1, 2, 3 or Ž and then press the ž button.
Notes
‒The
‒If the lighting is switched on, it remains on.
2To switch off the
Interval ventilation
For interval ventilation, the device is switched on automatically for five minutes per hour.
1Press the ÿ button to switch on the appliance. The fan starts at level 2. The interval ventilation can be used on level 1, 2 or 3.
2Press the
Note: This mode is indicated by alternating lighting up of the ž button with the corresponding speed.
3To end interval ventilation, press the ÿ button.
Lighting
The lighting can be switched on and off independently of the ventilation.
Press the @ button.
Setting the brightness
Press and hold the @ button until the desired brightness is reached.
Saturation notification
After 30 hours of operation, the saturation display œ of the grease filter blinks.
▯At the latest now the metal mesh grease filter should be cleaned. For instructions on how to clean the metal mesh grease filter, please see the chapter about Cleaning and maintenance.
▯While the saturation display is blinking, it can be reset with the œ button.
9