
8.3 Nozzle replacement
Fig. 10
1
Fig. 11
2
3
Fig. 12
Changing over to a different gas type
Only authorised specialists are permitted to change over to a different gas type. The nozzles needed for the gas type to be set are available as a conversion kit. Please specify the appliance type and the required gas type.
–Disconnect the appliance from the power supply.
–Remove the pot support, the burner ring, the burner cover and the burner head.
–If the appliance is connected rigidly to a gas main, it must be disconnected from the gas network. If it is connected via a gas safety hose, the appliance only needs to be pushed out of its mount from below and taken out of the worktop.
–Undo the securing nut (SW 11) of the thermocouple and the two securing screws that become visible under the detached burner head (Fig. 10).
–Remove the hob.
–Pull off the control knob. After undoing the securing screws (1) on the left and right (Fig. 11), you can remove the control panel by lifting (2) and pushing (3) it out of the latch (Fig. 12).
17