Instructions:
1)Remove Kick Plate
∙Unscrew and set aside
∙This kick plate will not be reinstalled. A replacement is provided in the kit.
2)Remove Safety Valve
∙The following steps will apply for a Baso Valve:
1)Unscrew 11/16” compression nut on oven orifice fitting.
2)Unscrew 11/16” compression nut on 11/16” elbow on Valve Main Burner Gas Inlet.
∙ Elbow itself should still be connected to Main Gas Inlet but detached from valve.
3)Unscrew 7/16” compression nut on Pilot Gas Inlet.
4)Unscrew 7/16” compression nut on Pilot Gas Outlet.
5)Unscrew 3/8” thermocouple nut.
6)Unscrew #10 sheet metal screw holding valve bracket onto lower front frame.
7)Remove valve.
6
1 | 2 |
3
4
5
Baso Safety Valve: Prior to removal
03/09/09 | P/N 4523367 | Page 2 |