Manuals / Garland / Kitchen Appliance / Oven

Garland H280 Installation Complete - Kick Plate Off, Installation Complete - Kick Plate On

Models: H280

1 23

Download 23 pages 40.12 Kb

Page 23

Installation Complete

Installation Complete

Installation Complete – Kick Plate Off

Installation Complete – Kick Plate On

03/09/09

P/N 4523367

Page 23

Image 23

Garland H280 manual Installation Complete - Kick Plate Off, Installation Complete - Kick Plate On, 03/09/09, Page

Contents

Tools Needed Installation PrerequisitesH280-series Valve Overheat / Relocation Kit Instructions RC Ovens Instructions for Applying Kit #45233681 Remove Kick Plate 2 Remove Safety ValveInstructions 4 Remove Door Springs 3 Unscrew Igniter BracketPage Prying spring from bell crank assemblyUnhooked oven door hinge link 03/09/09∙ For the door hinge with a microswitch 5 Remove Orifice Bracket Screw this nut onto the fitting to secure the fitting onto the tube 6 Install Extension Fitting if applicableStep 13. Otherwise, follow these steps to install the proper fitting ∙ This step must be performed if a TS-11 valve was just removed8 Remove Burner 7 Remove Left and Right Front Shields9 Unscrew Pilot Bracket from Oven Floor 10 Detach Igniter and Bracket from Pilot Assembly11 Assemble New Pilot Assembly ∙ Reattach original igniter 12 Attach New Pilot Assembly to Welded Bracket on New Burner 14 Reinstall Both Front Shields 13 Install New Burner03/09/09 15 Reinstall Orifice Bracket∙ Refer to Step 5 for orifice bracket connections Orifice inserted straight into burner opening16 Reinstall Door Springs 18 Attach Main Burner Gas Line Flex Tubes onto Valve 17 Reinstall Igniter BracketMain Burner gas fitting turned 180, facing right side of oven 19 Screw on Pilot Gas Flex Tube, Adjust Main Burner Gas FittingBaso Valve Nut 20 Install New Pilot Gas Tube3/16” Fitting Ferrule 3/16” Fitting Nut Baso Valve Ferrule 22 Attach Lighting Instructions to Valve Bracket 21 Connect Remaining Tubes and ThermocoupleFor RC Ovens 23 Attach Bracket to Oven For Standard Ovens24 Attach Valve Onto Bracket 25 Install New Kick Plate 03/09/09 Installation CompleteInstallation Complete - Kick Plate Off Installation Complete - Kick Plate On