11)Assemble New Pilot Assembly
∙A colored line on the top of the pilot indicates the type of fuel used. A BLACK line is used on a natural gas pilot, whereas a RED line is used on a propane pilot. Ensure the proper pilot is used.
∙Insert sheath onto new pilot assembly ignition wire
∙Push sheath onto wire until about 1 inch of orange ignition wire protrudes from the free end
New pilot assembly with sheath inserted onto ignition wire
∙Use electrical tape to secure the free end of the ignition wire and the end of the sheath. Use only enough tape to cover up exposed orange ignition wire. Do not tape over the hole at the tip of the wire.
Leave about 1” of ignition wire protruding before applying electrical tape
03/09/09 | P/N 4523367 | Page 10 |