7)Remove Left and Right Front Shields
∙ Both shields are attached to the upper support bar using 3 screws.
Left: Left side front shield, location of screws shown by arrows
Right: Right side front shield, location of screws shown by arrows
8)Remove Burner
∙Burner is not screwed down to oven floor and can be removed by gently sliding it out.
∙This burner will not be reinstalled.
Left: Lower oven cavity after removal of front shields
Right: Original burner with single welded bracket at end, will not be reinstalled
03/09/09 | P/N 4523367 | Page 8 |