Garland H280 manual Install New Kick Plate

25)Install New Kick Plate

∙The new kick plate (Part 14, Assembly Drawing) slants outwards to accommodate the valve. Ensure that the correct kick panel is installed.

Left: Old kick plate with flat profile. Do not install this kick plate.

Right: New kick plate with slanted profile.

∙The new kick plate is designed to hook onto existing screws on the oven frame. Look for the original hooking screws used for the original kick plate.

Original hooking screw on oven frame. Look for a similar screw on the other side of the oven

∙Hook the kick plate onto the screws using the L-shaped indentations on the sides of the kick plates. Ensure that the plate does not rest against the bracket directly.

03/09/09 P/N 4523367 Page 22