3.2.2Com User Frequencies

Fifteen Com User Frequencies can be saved with an assigned waypoint (WPT) identifier and Type.

NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz- specific user frequencies will be deleted from the user frequency list. This only affects the user frequencies within the 8.33 kHz spectrum.

3.2.2.1Viewing the Com User Frequency

1.Press FUNC to access the Functions. Turn the LARGE knob to select the Com Frequency Function.

Selected Frequency

Select Wpt Name

Select Wpt Type

Figure 3-3 Viewing User Com Frequencies

2.Turn the SMALL knob to view the Com User frequency function. Then, press ENT. Turn the SMALL knob to view the User Frequencies.

3.Press and release the FLIP/FLOP key to set the displayed frequency as the Active frequency.

4.Press the ENT key to set the displayed frequency as the Standby frequency.

3.2.2.2Deleting the Com User Frequency

1.Press the CLR key to delete this User frequency.

Press ENT Key To Delete

Selected Freq

Active Frequency

 

 

 

 

Position In List.

 

 

 

 

 

 

 

 

Turn SMALL Knob

 

 

 

 

 

 

 

 

 

 

To Select Entry.

 

 

Selected Frequency

 

Press ENT To Confirm

 

Deleting The Selected Freq

 

 

Figure 3-4

Deleting User Com Frequencies

 

190-01182-01 Rev. A

 

Garmin GNC 255A/255B Pilot’s Guide

3-3

Page 29
Image 29
Garmin 255A manual Com User Frequencies, Press the CLR key to delete this User frequency