Nav Database Frequencies | Garmin 255A guide

3.3.3Nav Database Frequencies

The GNC 255 contains a large database of Nav frequencies that may be recalled by identifier.

1.Press FUNC to access the Functions. With the Nav Frequency Function highlighted, turn the SMALL knob to view the Nav Database function. Then, press ENT.

2.Turn the LARGE knob to move the cursor to highlight a

character.

3. Turn the SMALL knob to select the desired character.

Turn SMALL Knob

To Select Character

Turn LARGE Knob

To Move Cursor

Press the ENT Key to Save the Displayed Value

Press the CLR Key To Return to the Previous Menu

Figure 3-21 Nav Database Frequencies

4.Repeat steps 2 and 3 to complete the desired identifier and then press the ENT key.

5.If available, the Frequency Type will be highlighted. Turn the SMALL knob to select the desired frequency.

Press ENT Key To Set

Selected Freq As Standby

								Selected Frequency
								Selected Frequency
							Wpt Type

Press FLIP/FLOP Key To Set			Selected Identifier


Selected Freq As Active
	Figure 3-22		Selected Nav Database Frequency

6.Press and release the FLIP/FLOP key to set the selected frequency as the Active frequency.

7.Press the ENT key to set the selected frequency as the Standby frequency.

190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

3-13

Image 39

Garmin 255A manual Nav Database Frequencies

Contents

GNC 255A/255B November Limited Warranty 190-01182-01 Rev. a Iii Operation US Toll Free Canada Toll Free Product Registration and Support Record of Revisions Contents 2.1 2.22.3 Index Index-1 This page intentionally left blank Product Description Getting Started Power/Com Volume/Squelch Knob Nav Volume/ID KnobPilot Controls OBS Key Tuning LARGE/SMALL Concentric Cursor KnobsFLIP/FLOP Key 5 C/N Com/Nav Key USB Port Func Function KeyMON Monitor Key Power On Com RadioSelecting a Com Frequency Monitoring the Standby Com Channel Saving a Com ChannelAfter selecting the desired characters, press ENT After making a selection, press ENT Description Frequency Database Reverse Look-Up Com Database Look-Up Emergency Channel Stuck MicRemote Frequency Selection Control Nav Radio Selecting a Nav FrequencySaving a Nav Channel 01-36 Listening to the Nav Audio Channel 14 CDI Display OBS Mode 15 DST Data Display Distance/Speed/Time DST Display This page intentionally left blank Functions Description Functions Com Frequencies Recent Com FrequenciesTurn the Small knob to select an Entry Press the CLR key to delete this User frequency Com User Frequencies Frequencies. Press ENT Editing a Com User Frequency Com Database Frequencies Com Database Frequencies Nearest APT function. Then, press ENT Com Nearest Airports APT Turn Small Knob To Scroll Through Available Frequencies Com Nearest Area Control Center ACC Frequencies 13 Com Nearest FSS Frequencies Com Nearest Flight Service Station FSS Frequencies 14 Com Nearest Weather Frequencies Com Nearest Weather WX Frequencies Recent Nav Frequencies Nav Frequencies Press the ENT key to delete the displayed frequency Nav User Frequencies Editing a Nav User Frequency 21 Nav Database Frequencies Nav Database Frequencies Nav Nearest VOR When duplicate identifiers are found, press ENT Functions display ICS ConfigurationAdjust Intercom Turn the Small knob to display the available VORs Turn the Small knob to turn the Aux Audio On or Off Aux Audio Speaker On/Off function. Then, press ENT Intercom On/OffSpeaker On/Off Intercom On/Off function. Then, press the ENT key Com Spacing System Configuration 34 Set Display Brightness Display Brightness Database Version function. Then, press the ENT key Display ContrastDatabase Info Display Contrast function. Then, press the ENT key Load Database function. Then, press the ENT key Load Database Press the Func key to return to the main menu Software VersionSerial Number Software Version function. Then, press the ENT key Timers Setting Up the Count Down TimerTo select a starting timer value Pressing ENT twice will stop the displayed Timer Setting Up the Count Up TimerViewing Timers in the Com Display Pressing CLR and then ENT will reset the displayed Timer 48 Count Down Timer Value Now Counting Up This page intentionally left blank Appendix Troubleshooting Calibration error Recalibrate resolver It can be enabledOr disabled via a Remote mounted If in Lock Out mode Updating the Frequency Database Messages Property with Power has been Re-apply power to the unitSwitch has been Verify glideslope deviation Been in pressed All installationsInstallations Remote com Nav radio is Contact dealer for service Not communicatingProperty with System This page intentionally left blank Index Remote frequency control 2-5 Reverse look-up 2-4 Revisions