2.5Distance/Speed/Time (DST) Display

When the GNC 255 has received data from an external device, such as a GPS receiver or DME sensor through the serial port, DST data will be available. If you are not connected to an external sensor, you will not see this display.

If DST data is not shown, pressing the T/F key will show DST data in the lower part of the display.

Station Identifier

Bearing To/From Station

Distance To Station

In Nautical Miles

Active Nav Frequency

Time To Station In

Hours and Minutes

Ground Speed From

GPS Unit In Knots

Figure 2-15 DST Data Display

NOTE: The If both GPS and DME data sources are connected to the GNC and dashes are displayed when distance/speed/time data is expected to be displayed, press the T/F key to prompt the GNC to display DST data.

190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

2-9

Page 25
Image 25
Garmin 255A manual Distance/Speed/Time DST Display, DST Data Display