Intel N270, FPC 5084 user manual Touch Screen, Specification, Driver Installation- Windows XP

FPC 5084 User Manual

4.2Touch Screen

The FPC 5084 uses the 5-wire analog resistve. There are the specification and driver installation which are listed below.

4.2.1 Specification

Touch Screen	5-wire Analog Resistive type
Touch Screen Controller	PenMount 6000 USB
	Touch Screen Controller IC
Communications	USB interface
Baud Rate	19200 baud rate fixed
Resolution	1024 x 1024 (10 bit A/D converter inside)
Power Input	5V
Power Consumption	Active: 24.6mA / Idle Mode: 13.4mA

4.2.2 Driver Installation- Windows XP

The FPC 5084 provides a touch screen driver that users can install it under the operating system Windows XP. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.

1.Insert Driver CD and follow the path to select the “\Drivers\XP\Step 5 - Touch”.

2. Follow the installing procedure and press OK.

Installation of Drivers 59