Digital Selective Calling

Showing and Setting the Duration of Trails for All Tracked Vessels

Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card.

1.From the Home screen, select Charts.

2.Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.

3.Select Menu > Other Vessels > DSC > DSC Trails.

4.Select the number of hours to show tracked vessels on the chart or 3D chart view.

For example, if you select 4 Hours, all trail points that are less than four hours old appear for all tracked vessels.

Showing the Trail Line for a Tracked Vessel

You can show the trail line for a specific tracked vessel.

Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card.

1.From the Home screen, select Charts.

2.Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.

3.Select Menu > Other Vessels > DSC > DSC List.

4.Select a vessel.

5.Select Review > Edit > Trail > Show.

Changing the Appearance of a Trail Line

You can change the appearance of a trail line for a specific tracked vessel.

Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card.

1.From the Home screen, select Charts.

2.Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.

3.Select Menu > Other Vessels > DSC > DSC List.

4.Select a vessel.

5.Select Review > Edit > Trail Line.

6.Select a color for the trail line.

Individual Routine Calls

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use the chartplotter interface to set up an individual routine call. When setting up an individual routine call from your chartplotter, you can select the DSC channel on which you want to communicate (page 113). The radio transmits this request with your call.

112

GPSMAP® 6000/7000 Series Owner’s Manual