Charts and 3D Chart Views

Perspective 3D Chart Appearance

Showing Range Rings

The range rings help you to visualize distances on Perspective 3D or Mariner’s Eye 3D. Note: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.

1.From the Home screen, select Charts.

2.Select Perspective 3D or Mariner’s Eye 3D.

3.Select Menu > Chart Appearance > Range Rings > On.

Selecting a Lane Width

You can indicate the width of the navigation lane appearing in Perspective 3D or Mariner’s Eye 3D. Note: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.

1.From the Home screen, select Charts.

2.Select Perspective 3D or Mariner’s Eye 3D.

3.Select Menu > Chart Appearance > Lane Width.

4.Complete an action:

•For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the width.

•For the GPSMAP 7000 series, use the on-screen keyboard to enter the width.

5.Select Done.

Showing Surface Radar

The chartplotter must be connected to a marine radar to show surface radar.

In Perspective 3D or Mariner’s Eye 3D, you can show radar returns from the surface of the water. Note: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.

Perspective 3D with Surface Radar Information

1.From the Home screen, select Charts.

2.Select Perspective 3D or Mariner’s Eye 3D.

3.Select Menu > Surface Radar > On.

Showing Other Vessels

See “Configuring the Appearance of Other Vessels” (page 66).

20

GPSMAP® 6000/7000 Series Owner’s Manual