Charts and 3D Chart Views

Showing or Hiding Hazard Colors

1.From the Home screen, select Charts > Mariner’s Eye 3D > Menu > Chart Appearance > Hazard Colors.

2.Complete an action:

•Select On to view shallow water and land with a color scale. Blue indicates deep water, yellow is shallow water, and red is very shallow water.

•Select Off to view the land as seen from the water.

Mariner’s Eye 3D, Hazard Colors Off

Mariner’s Eye 3D, Hazard Colors On

Showing Range Rings

See “Showing Range Rings” (page 20).

Selecting a Safe Depth

You can set the appearance of a safe depth for Mariner’s Eye 3D.

Note: This setting effects only the appearance of hazard colors in Mariner’s Eye 3D. It does not effect the safe water depth Auto Guidance setting (page 59) or the sonar shallow water alarm setting (page 105).

1.From the Home screen, select Charts > Mariner’s Eye 3D > Menu > Chart Appearance > Safe Depth.

2.Complete an action:

•For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the depth.

•For the GPSMAP 7000 series, use the on-screen keyboard to enter the depth.

3.Select Done.

Selecting a Lane Width

See “Selecting a Lane Width” (page 20).

Showing Other Vessels

See “Configuring the Appearance of Other Vessels” (page 66).

Showing Surface Radar

See “Showing Surface Radar” (page 20).

Showing and Configuring Data Bars

See “Data Bars” (page 62).

Using Waypoints and Tracks

See “Waypoints” (page 34) or “Tracks” (page 39).

GPSMAP® 6000/7000 Series Owner’s Manual