Almanac, Environmental, and On-boat Data

Configuring the VGA Display

Before you can configure the VGA display mode on a GPSMAP 7015 or 7215 chartplotter, you must set the video Source setting to VGA Input (page 55).

1.From the Home screen, select Information > Video.

2.Touch anywhere on the screen. An on-screen display appears.

3.Complete an action:

•Touch the brightness arrows to adjust the screen brightness.

•Touch the contrast arrows to adjust the screen contrast.

Exiting the VGA Display

1.From the Home screen, select Information > Video.

2.Touch anywhere on the screen. An on-screen display appears.

3.Touch the display mode icon in the upper-left corner. The video menu appears.

4.Select Source.

5.Select a new value for the video Source setting (page 55).

56

GPSMAP® 6000/7000 Series Owner’s Manual